Ethereum: BFGminer cannot find NanoFury on Windows
As an avid Ethereum miner, I recently purchased a Nanofury ASIC device in hopes of maximizing my mining profits. After some trial and error, I got stuck trying to get the device to recognize my NanoFury ASIC device in the Bitcoin Fog (BFGminer) software. In this article, I will share my experience and provide troubleshooting tips that will help you resolve similar issues.
Setup
I set up my system with a fresh install of Ubuntu 20.04 on my Windows 10 PC. I installed BFGminer from the official GitHub repository, and then installed the NanoFury firmware for my ASIC device. I also made sure that the necessary drivers were installed and configured properly.
Initial Issues
After running BFGminer on my system with the NanoFury ASIC device connected, I encountered a few issues:
- No Output: Despite the software recognizing the hardware, there was no sign of mining activity.
- Mining Speed Not Increasing
: The hash rate (H/s) remained the same as when using the other mining device.
Troubleshooting Steps
I followed these steps to get the NanoFury ASIC device up and running with BFGminer:
- Update Drivers: Make sure to update the GPU drivers for the NVIDIA graphics card paired with the NanoFury ASIC device.
- Reboot the system: A simple reboot can often fix issues related to driver conflicts or incorrect BFGminer settings.
- Check BFGminer Configuration Files: Review the bfgminer.conf file and make sure that the hardware detection options are configured correctly.
Additional Tips
If you are experiencing similar issues, here are some additional tips:
- Check Firmware Version: Make sure that your NanoFury ASIC device firmware is up to date by visiting the manufacturer’s website.
- Check System Compatibility: Make sure that your system meets the minimum requirements for BFGminer and NanoFury ASIC devices.
- Disable Any Antivirus Software: Temporarily disable any antivirus software to avoid conflicts.
Conclusion
While my experience was not without its challenges, I am confident that with patience and persistence, you will be able to get BFGminer to recognize your Nanofury ASIC device on Windows. If you are experiencing persistent issues or have any further questions, feel free to ask in the comments below!
I hope this article was helpful to fellow miners who may be experiencing similar issues. Don’t forget to stay up to date on the latest developments and firmware updates to ensure optimal performance. Happy meaning!